Sunday, 5 June 2011

State of the nation

So after a further day's work this is the state of play.

Earthworks

The fact that our local DIY shop (focus) is closing down spurred me into action.

Firstly I have decided to use the GRS interlink system - http://www.gardenrailsystem.com/typical5.html

So I have purchased enough bricks, sand, gravel etc to complete the line.

Secondly I have started the base earthworks for the line allowing us to plant up the areas not affected by the alignment.

The shot above shows the bricks temporarily laid to show the position of the track.

Concrete will be used to ensure a good base for the bricks where the earth has been made up.

Saturday, 19 March 2011

Large scale show, Leamington

Today we attended the large scale show just off the Fosse Way near Leamington Spa. 

I purchased a useful book…. http://www.amazon.co.uk/Garden-Railways-Ground-David-Pratt/dp/0955259800

and a flying bench cheap…

http://www.ipengineering.co.uk/page68.html

I’m not really expecting to run passenger trains, but this makes a useful ‘quarryman’s’ vehicle to go with the slate wagons.

Dad also purchased the zoo car:

http://www.ipengineering.co.uk/page64.html

to go with his other bugs and his Prince…which I’m sure will make visits to my garden line from time to time.

So, now I have to work out how to build the line this summer with the minimum of cost/time spent doing it….

Monday, 6 December 2010

New blog

Check out my new 0-14 blog here:
http://ohfourteen.blogspot.com/

Tuesday, 30 November 2010

duckets done

And here are the duckets added after fun and games getting them to bend and adhere once bent. A little bit of filler was required to hide a couple of areas where the plywood ended up cracking whilst I was trying to bend it! I've also ordered some sanding sealer (White) required to finish the roof. Now to source the correct grab handles...



Monday, 29 November 2010

curly!

Well much progress tonight. The overlays went on easily with superglue, the doors requiring an extra lamination. Then the central roof bars were added and the roof forming strips laid on with masking tape strips to form the curly roof. The bogies and chopper couplings (accucraft) were then added, the latter retained with 10ba nuts/bolts.

Finally, having checked photos of the real thing, I binned the truss rods in the kit (far too chunky and square section) and made some better circular section ones from wire myself.

Now I need to add kleenex tissues to the roof (yes really) and attach the duckets. This requires soaking thin plywood in hot water to shape it - ummm sounds fiddly! My practice attempt was ok but the top of the ducket has a very tight bend to form Might be easier in brass, but then I would still have to add the plywood overlay to that. Thinking cap on...!



Sunday, 28 November 2010

brakes off...

As mentioned on my other (009) blog, I have decided to spend more of my time on garden railway things for a while. Thus there have been further earthworks in the garden, plans created for a method of tracklaying and work restarting on the de winton. Alongside this I have started work on my ip engineering kit for the fr's brake van no.1 aka the "curly roofed van".

Here is the current state of construction - sides, ends and floor all glued together and roof supports glued in (the elastic bands are to hold it all square whilst it dries). Next come the beautiful overlays all made from laser cut plywood. Very impressive.

The bogies are already complete too.